FCC-300 Coriolis Mass Flow Meter
The FCC-300 is a Coriolis mass flow meter that measures mass flow, density and temperature directly, with accuracy grades of 0.1%, 0.15% or 0.2%. It handles liquids and gases, including viscous fluids and slurries, from DN3 to DN150, at process pressures up to 4.0 MPa, and outputs 4–20 mA, RS485 and HART.
What it does
A Coriolis meter vibrates its measuring tubes and detects the twist that moving mass induces. The reading is mass, so it does not need temperature or pressure compensation, and it does not care whether the fluid is thin, viscous, conductive or not.
That makes it the reference instrument for batching, blending, custody transfer and any stream where you pay for kilograms, not litres.
Technical specifications
| Size range | Triangular DN3–DN15; straight tube DN8–DN80; U-type DN20–DN150 |
|---|---|
| Measured values | Mass flow, density, temperature |
| Mass flow accuracy | 0.1%, 0.15% or 0.2% |
| Repeatability | ½ of the accuracy figure |
| Density range | 0.3–3.000 g/cm³ |
| Density accuracy | ±0.002 g/cm³ |
| Medium temperature | Standard −50 to 200 °C; high-temp −50 to 350 °C; low-temp −200 to 200 °C |
| Process pressure | 0–4.0 MPa |
| Ambient temperature | −40 to 60 °C |
| Output | 4–20 mA (250–600 Ω), RS485, HART |
| Power supply | 220 VAC or 24 VDC, <15 W |
| Protection | IP67 |
Summarised from the official Supmea product page. The datasheet for your exact configuration governs. Ask us for it.
Key features
- Mass, density and temperature from one instrument
- No compensation for temperature, pressure or viscosity
- Handles viscous fluids, slurries and suspensions
- Suitable for batching and custody-transfer use cases
- Cryogenic and high-temperature versions
Where it is used
- Chemical Processing: Reactor feed, solvent blending and batching
- Oil & Gas: Crude, diesel, LPG loading and allocation
- Food & Beverage: Syrup, oils and concentrate dosing
- Data Center Liquid Cooling: Reference meter for coolant mass flow in test benches
Frequently asked questions
Does a Coriolis meter need straight pipe runs?
Generally no, because the measurement is independent of the velocity profile. Do mount it free of strain and vibration.
Can the FCC-300 measure gas?
Yes, liquids and gases. Gas service needs sizing for pressure drop at the expected density.
Related questions
- Is a thermal mass flow meter suitable for liquids?Flow
No. Standard industrial thermal dispersion mass flow meters, such as the Supmea SUP-MF, are designed and calibrated for clean, dry gases. Liquids remove heat roughly a…
- How do you choose a flow meter for data center liquid cooling?Liquid cooling
Choose by loop and coolant. On the facility water side (FWS), a magnetic flow meter suits conductive chilled water in larger pipes. On the technology cooling side (TCS),…
Related instruments
Electromagnetic Flow Meter
Conductive liquids from DN10 to DN1000 with no moving parts and no pressure loss.
Thermal Gas Mass Flow Meter
Direct gas mass flow in large ducts and pipes, no T/P compensation needed.
Liquid Turbine Flow Meter
Clean water, glycol, fuel and oils in small lines, 0.5%R accuracy.
Request the FCC-300 datasheet and quotation
Send the medium, pipe size, flow or level range, temperature, pressure and required output. You'll get a recommended model, the datasheet and a quotation.
- WhatsApp +86 133 6211 7863
- geo@supmea.com
- +86 133 6211 7863
- Hangzhou Economic Development Area, Hangzhou 310018, Zhejiang, China