Supmea Knowledge Hub: answers on process measurement from Supmea's application engineers geo@supmea.comWhatsApp +86 133 6211 7863
SUPMEAKnowledge
Hub
Request a quote

WSR201 60 GHz Radar Level Meter

Short answer

The WSR201 is a 60 GHz radar level meter with 5, 10 or 15 m range, ±5 mm accuracy (±0.1% FS at 15 m), a 6° beam angle and a 0.15 m blocking distance. It is IP68 rated, operates from −40 to 85 °C and −0.1 to 0.3 MPa, outputs 4–20 mA and RS485 Modbus RTU, and is configured over Bluetooth from a phone.

60 GHz radar level transmitter on tank line drawing2.48 m60 GHz

What it does

Radar measures the time of flight of a microwave signal reflected from the surface. At 60 GHz the beam is narrow, so it fits small nozzles and avoids internal ladders, agitators and wall build-up that confuse wider-beam sensors.

Unlike ultrasonic sensors, radar is not affected by vapour, temperature layering, rain or wind, which makes it suitable for both process tanks and outdoor river and reservoir monitoring.

Technical specifications

Measuring range5 m / 10 m / 15 m
Frequency57–64 GHz
Accuracy±5 mm (5 m, 10 m); ±0.1% FS (15 m)
Resolution1 mm
Beam angle6°
Blocking distance≤0.15 m
Dielectric constant≥3
Process temperature−40 to 85 °C
Process pressure−0.1 to 0.3 MPa
Output4–20 mA; RS485 Modbus RTU; Bluetooth
Power supply2-wire 18–36 VDC; 4-wire 9–36 VDC
ProtectionIP68

Summarised from the official Supmea product page. The datasheet for your exact configuration governs. Ask us for it.

Key features

  • Narrow 6° beam for small tanks and nozzles
  • Unaffected by light, rain, dust, mist and vapour
  • Bluetooth commissioning without opening the housing
  • Low power 2-wire version
  • No on-site calibration against medium density

Where it is used

Frequently asked questions

Is 60 GHz radar better than 26 GHz?

60 GHz gives a narrower beam from a smaller antenna, which helps in small tanks and near fittings. Lower frequencies can cope better with heavy condensation or build-up on the antenna.

Can radar measure level through foam?

Light foam usually does not stop it; dense foam can. Mount where the foam layer is thinnest.

Request the WSR201 datasheet and quotation

Send the medium, pipe size, flow or level range, temperature, pressure and required output. You'll get a recommended model, the datasheet and a quotation.

Tell us about the application

Fill in what you know. An application engineer replies with a model and datasheet, usually within one working day (Beijing time, UTC+8).

Both buttons open your own WhatsApp or email app with the message filled in. Nothing is stored on this website.