Popular:Magnetic flow meterCDU flow meterRadar levelPressure transmitterpH meter geo@supmea.comWhatsApp +86 133 6211 7863
SUPMEAKnowledge
Hub
Request a quote

SUP-DO7018 Optical Dissolved Oxygen Sensor

Short answer

The SUP-DO7018 is an optical (luminescence quenching) dissolved oxygen sensor measuring 0–20 mg/L or 0–200% saturation with ±1% accuracy and a 10-second response. It needs no membrane or electrolyte and does not consume oxygen. Drift is under 1% per year, the sensor cap lasts about one year in normal use, the body is titanium, it is IP68 rated, and it communicates over RS485 Modbus RTU.

Optical dissolved oxygen sensor immersed in basin line drawingTiRS485 Modbus

What it does

Optical DO sensors replace the membrane and electrolyte of a polarographic sensor with a luminescent cap. Blue light excites the cap; oxygen shortens the red emission, and the sensor converts that lifetime into mg/L.

Supmea optical DO sensors are in service in automotive-plant wastewater treatment and municipal plants (see our cases), where lower maintenance is the main reason for the switch.

Technical specifications

Range0–20 mg/L or 0–200% saturation
Accuracy±1%
Response time10 s
Drift<1% per year
Temperature0–50 °C, built-in sensor, automatic compensation
Max depth10 m
OutputRS485 Modbus RTU
PowerDC 6–24 V (see datasheet), <50 mA
Cable10 m standard; 5, 15, 30 m optional
Cap life~1 year in normal use
BodyTitanium (Ti 2)
ProtectionIP68
CalibrationOne- or two-point

Summarised from the official Supmea product page. The datasheet for your exact configuration governs. Ask us for it.

Key features

  • No membrane, no electrolyte, no oxygen consumption
  • No flow-velocity requirement
  • Low drift, infrequent calibration
  • Digital Modbus direct to PLC or SCADA

Where it is used

Frequently asked questions

Optical or membrane DO?

Optical sensors cost more but avoid membrane and electrolyte maintenance and do not need water movement.

Does it need a separate transmitter?

It outputs Modbus RTU directly; pair it with a Supmea DO analyzer for display, 4–20 mA and relays.

Diagrams

How the optical dissolved oxygen sensor works and how to install it.

Request the SUP-DO7018 datasheet and quotation

Send the medium, pipe size, flow or level range, temperature, pressure and required output. You'll get a recommended model, the datasheet and a quotation.

Tell us about the application

Fill in what you know. An application engineer replies with a model and datasheet, usually within one working day (Beijing time, UTC+8).

Both buttons open your own WhatsApp or email app with the message filled in. Nothing is stored on this website.